+ Reply to Thread
Results 1 to 3 of 3

Thread: Win2K GeForce2 and UT STUPID MISTAKE!!!

  1. #1
    wifidng
    Guest

    Win2K GeForce2 and UT STUPID MISTAKE!!!


    OK I made a stupid mistake and am putting it in different forum topics 'cause it's symptoms appear as other problems that may be posted under other topics.



    I am henseforth a dumbass. I have made one of the stupidest mistakes and believe others that share my stupidity may also slap themselves in the head when they read this. First let me explain me setup, then the problems I was noticing, and finally the answer to all of the problems I have been enduring.



    I have two nice machines (at least they are now) and compared them to a control machine, a Gateway Select 1100 that was another machine at work.

    I have yet to overclock my gaming machine and never my work machine so these setups and scores are stock.



    1: My gaming machine



    AMD 1000 MHz 200MHz FSB stock fan

    256MB generic PC133 SDRAM (2 DIMMS)

    ASUS A7V BIOS ver 1005a

    Maxtor 40GB 7200RPM HDD

    Leadtek Winfast GeForce2 GTS 64MB DDR

    SBLive Platinum ver 5.0

    Creative labs 5X DVD w/dxr

    YAMAHA 16x/10x/40x Burner

    INWIN case with 300W P/S



    2: My Workstation (actually my boss'es, but I built it and maintain it)



    AMD 1000MHz 200MHz FSB Coolmaster DP5-6H11

    256MB Mushkin REV2

    FIC AZ11

    IBM Deststar 45GB 7200 RPM HDD

    Diamond Viper V770 Ultra 32MB

    On board audio

    Mitsumi 32x CDROM



    3: Gateway select 1100

    AMD 1100MHz 200MHz FSB stock fan

    some MSI socket A board specific only to Gateways

    512MB Generic CAS3 SDRAM (2 Dimms)

    GeForce2 Ultra 64MB DDR

    IBM Deskstar 45GB 7200 RPM HDD

    SBLive Value

    Promise Ultra ATA 100





    Now Besides the SBLive the first two machines have similar setup as far as drivers go and the A7V and the Gateway can share the same Promise drivers. So here's a list of what I was using for both machines.



    Windows Professional Service Pack 1

    AMD AGP reg Patch

    VIA 4in1 425a

    Detonator 6.18 thru 7.52 BETA

    DirectX 8.0a with mouse reg patch

    Promise U100D160B25 (for the A7V and the Gateway)

    The Gateway was running drivers it came with except the SP1 and the AMD AGP reg patch.



    Ok now on to the problems.

    I'm always interested in how fast these machines are compared to others so I downloaded 3DMark2000 to see. I was very disapointed to see that these machines scored very low compared to others online. Infact the workstation scored the highest of the two at only 3800. With a little look at different detonator drivers I got it up to 3900. Now that was ok compared to online scores considering it had a TNT2 although still a little low, but the gaming machine with the A7V and the GeForce2 was only 3200 MAX!!! The Gateway however was impressive (at this point anyway with a score of 4300.) Now this made me very angry. Plus, the damned A7V based machine would not run Unreal Tournament in Direct3D. The mouse lag was horrible. So I installed it on the workstation and had the same horrible mouse lag. The A7V also took a long time to pass the splash screen. This, though, was a problem I learned to live with since I am pretty patient. Up to this point both machines had DirectX7. So I decided to install DirectX 8.0. Both machines still did not change. I then saw a mouse reg patch on Microsoft's site and installed it on the machines. It still didn't work but did help the workstation a bit. I then switched Detonator drivers to 6.50. The workstation then worked like a charm in UT, but the gaming machine did not. I was wondering if it should be called a gaming machine at this point. Now the workstation was scoring about 4300 and the gaming machine was up to 4100. So I decided to tackle the gaming machine and leave the workstation alone since I was happy with it now (especially since it was as fast as the Gateway and although both were perchased at the same time the one I built was a third the price). I had Generic RAM in my gaming machine and noticed how CAS2 RAM helped the workstation beat the Gateway so I decided to buy new RAM for the gaming machine and also a USB mouse (Microsoft Optical). For the RAM I got 256MB Micron CAS2 ver 7E (for only $110 at that). I did notice an increase in the benchmarks as it was now beating the workstation and the Gateway @4444. But the UT problem persisted. I then go to Epic games web page and find a DLL for the GeForces that supposedly helped solve what seemed to be my problem, but remember my stupidity was my problem. This did not solve my problem. So at the advice of a friend I decided do reinstall Win2k and start from the ground up back from DirectX7 and install and test driver by driver every change I make. It is now that I start on the endeavor that solves the problem.

    Ironically it was not during the installation but the backup process where my problem would show it's solution. I burned on CD all my games and files (about 17GB). Needless to say this could get expensive so I Zipped the directories of some games so that some would then fit on a single CD. Well I reformatted and partitioned the drive and Win2k installed easily. I then grabbed the one CD that had a Zip'd game I wanted to put back on the computer. Now this game had directories and all so when it was Zip'd all the directories turned to paths, but were not store as such in the Zip window when I click on the Zip file. I selected all the files in the window and dragged it into the directory I wanted. "Hey", I noticed. All the files were in the same directory and not in their respective directory. I went back into the zip file and decided for the first time to use the extract command. Hello, directories are now there and files are in them as well. As I stared at the screen the gears in my head started to grind... I wonder... Some of the drivers I download are in zip format... Hmmm... Lemme check to see what drivers are zip'd. I find that the Promise drivers and the Via 4in1 drivers are zip'd with directories. What does this mean?? Well when I clicked and dragged I noticed a prompt came up that would ask to overwrite files. (stop laughing) Well I figured this was some wierd bug so I clicked ok and went on. This also means that I was using a mix of Win2K Win9x and WinNT drivers on the Win2K machines I built. I have been building my own machines for four years, downloading drivers for one, and benchmarking for 2 months and have never bothered to learn what the extract botton does in Winzip.

    So did it work?? Better than I could've dreamed. The workstation now scores 4920. And the gaming machine? Well after a short boot up and after it ran well in UT @1600x1200 I decided to use Detonator3 7.52 BETA and Via 4in1 425a it scored 5333 on lowest res Athlon enhanced and oddly 6895 using default settings at default res using D3D optimization (go figure, it even gets lower scores at lower res). Am I stupid or what?? I guess the only credit I can give myself is for at least solving the problem, but still...

    Now I have solved what seems to have been a performance curse that has been plaguing me. I will upgrade the CPU fan to a Swifttech cause performance creeps down when its on for long periods of time and I'll finally start to overclock since now I can see some real results. I belive I have made a great sacrifice, embarrassing myself, for the benefit of any other poor sap who makes the same idot mistake. I deserve all flame and ridicule and formally ask for the web master of this forum to permanently change my title to Dumbass.



    PS the workstation's UT fix was that the Detonator3 driver had to upgraded due to the fact it was a TNT2 as was said on Epics page.







    Take my advice with a grain of salt, for I AM A DUMB-ASS!!!

    More Information:
    1. Ok i figured this **** out by myself wihch was NOT hard haha some stupid mistake
    2. I know this is probably a stupid mistake somewhere, please help me out
    3. Small and stupid mistake but really throws a monkeywrench into things for you
    4. It's a stupid, corporate billing program that I have to have on my laptop, and there's no chance of it ever getting patched for Win2k, but I would love anyone who knows of a workaround to fix this error
    5. It's working fine now! Stupid mistake ! Nothing to see here, folks, move along
    6. 06/29/03, Dont blame windows xp for your own stupid mistakes, if u just download all the updates, and looking at ur post, get half decent computers

    More:


  2. #2
    khanhhoa87
    Guest


    Do you write boox, if so where could i get one...

    Thanks in advance



    "akuna mutata" braza...

    More Information:
    1. 10 posts - 9 authors - Last post: May 5, 2008Of course I could be making a stupid mistake, too
    2. real weird stuff, i'm gonna post what i did to my inf file and see if i'm somehow making some stupid mistake
    3. 2 posts - 2 authors - Last post: May 6, 2001I have made one of the stupidest mistakes and believe others that share my stupidity may also slap themselves in the head when they read this
    4. Help needed fixing stupid mistake - Hi, I was trying to reinstall X on my Mac and deleted /usr/X11R6 and /etc/X11 on my Lindows (Debian) box, not realizin
    5. 12 posts - 9 authors - Last post: May 8, 2001win2k nvidia geforce2 mx live! amd thunderbird 900 256 cas 2 pc133 ram all ide ok with that said, two completely different systems and the game crashes
    6. I have tried to use the win2k cd,There's no such thing as a stupid question, but they're the easiest to
    7. php3?show=5355 - Cached - Similarmacbook pro 13"I guess this is a mistake I have done by using the stupid bootcamp thing
    8. Geforce2-Geforce2MX400 : Memory Bandwidth · 3d Mark2000 Score - Please Look at this · MSI StarForce Geforce 2 Pro & Win2K driver problems · One more question - Giants - Which one is bottleneck?

+ Reply to Thread

Similar Threads

  1. Just got penalized BADLY for a stupid mistake I should have noticed. *Ouch*
    Welp, I didn't realize this until Google penalized ALL of my keyphrases. Google gave my site about -400 on every search phrase for my site. Basically...
  2. I think I have done a stupid mistake :( please help
    I have registered a domain name today (27-2-2007) at GoDaddy and tonight I logged in to my account and canceled this domain from my account BY...
  3. Stupid Mistake, But i Learned my lesson
    So I started the website www.ineedquarters.com as a micro-scholarship site and spent some time developing it and submitting to various other sites. ...
  4. Stupid, stupid domain prices being asked for ...
    What makes some people think that anyone will pay any of the dumb prices that are being asked for domain names? A quality domain name will earn...
  5. A7V + v7100 Geforce2 MX + Win2k = CRASH!
    Can anyone help me with this: My system hangs when I try to play certain 3D games.. Don't know if there's a difference between D3D or OpenGL.....

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Automatic Translations (Powered by Powered by Google):
Afrikaans Albanian Arabic Belarusian Bulgarian Catalan Chinese Croatian Czech Danish Dutch English Estonian Filipino Finnish French Galician German Greek Hebrew Hindi Hungarian Icelandic Indonesian Irish Italian Japanese Korean Latvian Lithuanian Macedonian Malay Maltese Norwegian Persian Polish Portuguese Romanian Russian Serbian Slovak Slovenian Spanish Swahili Swedish Taiwanese Thai Turkish Ukrainian Vietnamese Welsh Yiddish