Routing

[kshung1981]

I have SCO Unix. I have 2 routers. as it is now, when someone telnets to UNIX and goes through router #1 everything is fine. The users who go through router #2 can not connect at all. I talked to CISCO and they said I need to set up a second Gateway on UNIX. They said what is happening is that UNIX tries to respond, but it is responding to router #1 becasue that is all that it knows. What is the command for adding a second Gateway?

More Information:

1. The Ethernet Routing Switch (ERS) portfolio includes a broad portfolio of enterprise Ethernet switching products designed to securely deliver Layer 2 connectivity - to Layer 4-7 content-aware intelligence
2. Because of this similarity, the term Routing Information Protocol (or just RIP) is used to refer to both the XNS protocol and the protocol used by routed
3. The team then devised a routing scheme designed to take advantage of daily and hourly fluctuations in electricity costs across the country
4. Bank of America routing numbers are 9–digit numbers assigned by the American Bankers Association
5. However, this routing information escaped from Pakistan Telecom to its ISP PCCW in Hong Kong, which propagated the route to the rest of the world
6. IPv6, its use with interior routing protocols, and its interoperability and integration with IPv4 are also integrated into this book
7. A perfect tool that allows shippers and consignees to manage their inbound and outbound logistics activities by posting their routing guide on the web
8. The survey should not be considered as comprehensive, but rather as a representation of available vehicle routing packages
9. Routing is the process of defining routes for the packets to its destination through an internetwork and this is performed by the router
10. The Border Gateway Protocol is an inter-Autonomous System routing protocol

[qrong]

Your routing problem is a basic issue that the host has a default gateway that points to a router/gateway that is not the right one. There are numerous ways to solve this, depending on the routing requirements.



If you are coming into the host via the second router from specific IP addresses or subnets; you simply add a static route that points at the second routers (host side) IP address (gateway) for the subnets/IPs.



This is done with the ifconfig command. The exact syntax of ifconfig is machine dependent, so check your man page on this command.



In a nutshell, you must tell the box you are telnetting into how to return the packets based on destination address (of the returning packets) coupled with the IP address of the gateway. This is called static routing and it the best way to go.



You need to understand (1) static routing and (2) the ifconfig command on your system.

More Information:

1. Air Routing is a Worldwide leading provider of international trip support and corporate flight handling
2. The system is based on a concept called onion routing
3. It appears that the topic of our HOWTO is getting popular, so we decided to start a mailinglist dedicated to discussions about advanced routing & shaping with Linux! The advent of the Linux Advanced Routing & Traffic Control list also means that questions asked privately will no longer be
4. GeoMicro's AltaMap Routing Engine with a route optimization was designed and developed to create routes based on user specified origins, waypoints, and destinations
5. When routing packets across a network, things do occasionally go wrong
6. In Linux, the ifconfig command is used to configure the NIC and the command route is used to set up routing tables for that mach
7. "Route Rite"® Legend Routing Accounting Software is the product for you
8. File Format: PDF/Adobe Acrobat - Quick Viewby M Caesar - Cited by 64 - Related articlestheir resulting routing policies, why BGP evolved the way it
9. This site is designed to promote coordination of the Internet Routing Registry (IRR), the union of world-wide routing policy databases that use the